Air conditioning installation in Dartford, Kent and London
We survey, fit and commission air conditioning in homes and businesses, and hand it over with the paperwork you need.

Who it is for
Homes. Bedrooms that are too hot to sleep in, home offices, loft conversions, garden rooms and conservatories. Rooms that get the afternoon sun or sit under the roof are usually the ones people want cooled first.
Businesses. Offices, shops, salons, studios and server rooms. Anywhere staff and customers need to be comfortable, or equipment needs to stay cool.
Systems we fit
Wall-mounted split systems are the most common choice. One indoor unit high on the wall, connected to an outdoor unit by a pair of insulated copper pipes. They suit most rooms in homes and smaller offices.
Ceiling cassettes sit flush in a suspended ceiling and blow air in four directions. They suit shops and open-plan offices, where wall space is valuable and you want the air spread evenly across the room. We fitted cassettes like this in a milkshake shop at Bluewater.
We can also advise on multi-split, ducted and floor-standing systems. Ask at the survey.
How an installation works
- Survey. We visit, measure the room and look at how much sun it gets and what else gives off heat. That tells us what size of system it needs. A unit that is too small never keeps up, and one that is too big switches on and off and wastes energy.
- Positions and pipe route. We agree with you where the indoor and outdoor units will go, and how the pipework and cabling will run between them. We check the power supply at the same visit.
- Quote. You get a quote setting out the system, where each unit goes and what is included. The survey and quote are free.
- Indoor unit. We fix the mounting plate level, drill a single core hole through the wall with a slight fall so the condensate drains away, and hang the unit.
- Outdoor unit. It goes on a wall bracket or ground stand, on anti-vibration mounts, with its own isolator switch so it can be made safe for servicing.
- Pipework and drain. The refrigerant pipes are insulated along their whole length and, where they are on show, run in trunking. The condensate drain is run to a suitable outlet.
- Pressure test and vacuum. Before any refrigerant goes into the pipes, we pressure test the joints with nitrogen to prove there are no leaks, then pull a deep vacuum to remove air and moisture. Skipping this step is the main reason badly fitted systems leak and fail early.
- Commissioning and handover. We release the refrigerant, run the system in cooling and heating, check its temperatures and pressures, and show you how to use the controls.
Brands
We fit Daikin, Mitsubishi Electric, Mitsubishi Heavy Industries and Fujitsu systems, and other brands. We will recommend a model based on the room, how you want to use it and your budget. Things worth thinking about are how quiet it is, whether you want to control it from your phone, and how well it heats if you plan to use it in winter too.
What you get
- A system sized for the room, not a guess.
- A neat installation, with pipework insulated and run in trunking where it is on show.
- The system pressure tested, evacuated and commissioned, with a record of the commissioning.
- The manufacturer's warranty paperwork.
- Work by an F-Gas certified company. We hold REFCOM company certificate REF1023302, which covers installing and commissioning air conditioning and heat pump equipment.
- Advice on looking after the system, and servicing when it is due.
Installations we have done
See more of our workQuestions about air conditioning installation
How long does an installation take?
A single wall-mounted system in one room is usually fitted and commissioned in a day. A multi-split system with several indoor units, or a job with long or awkward pipe runs, can take two or three days.
Commercial installations vary much more. They depend on the number of units, the ceiling type, access, and whether we need to work outside your opening hours.
We will give you a realistic timescale with your quote, so you know how long we will be on site and when the system will be ready to use.
Where does the outdoor unit go?
Usually on an outside wall close to the room, either on a wall bracket or on a ground stand. The closer it is to the indoor unit, the shorter the pipe run and the neater the job.
It needs space around it for air to flow, a solid fixing, and access for servicing. We also think about neighbours, how it looks from the street, and whether it needs a protective cage. On commercial jobs, flat roofs are often the best spot.
We agree the position with you during the survey, before any work starts.
Do I need planning permission for air conditioning?
Often not, but it depends on the property and where the outdoor unit goes. Unlike air source heat pumps, air conditioning units do not have their own permitted development rights in England, so councils look at them case by case.
You are more likely to need permission if the building is listed, if it is in a conservation area, if the outdoor unit would be on a wall facing the road, or if the property is a flat or commercial building. Leaseholders usually also need the freeholder or landlord to agree before any work is done.
The safest thing is to check with your local council planning team before you go ahead. We can tell you where the outdoor unit would go and what it looks like, which is what the council will want to know.
How much does air conditioning installation cost?
Every job is different, so we price each one after a survey rather than quoting a figure up front. The main things that affect the cost are:
- The number of rooms and indoor units.
- The type of system: wall-mounted, ceiling cassette or ducted, single split or multi-split.
- The size of the system, which depends on the size of the room, how much sun it gets and what gives off heat in it.
- How far the pipework has to run between the indoor and outdoor units, and whether it goes through walls, floors or ceilings.
- Where the outdoor unit goes, and whether it needs a wall bracket, ground stand or access equipment.
- The electrical supply, and how far it is from the consumer unit.
The survey and quote are free and there is no obligation. Book a call and we will arrange a visit.
Get a free quote
Tell us about the property and what you need. We will call you back, arrange a survey and send you a quote.
- Phone
- 07588 656887
- Hours
- Monday to Friday, 8am to 5pm. Out-of-hours callouts available.





